CGPA to percentage is the conversion that most application forms ask for and many mark sheets leave out. This CGPA to percentage calculator gives you the number in one tap, and it works in the other direction too.

CGPA to Percentage Calculator — Convert CGPA to % Online Free
Free & Private Student Tool

CGPA to Percentage Calculator

Convert your CGPA to percentage, or percentage back to CGPA, using the formula your board or university uses. Everything runs in your browser.

No sign-upInstant resultsNothing is stored
Enter a value between 0 and 10.
Percentage--

Enter your CGPA to see the result.

CBSE: percentage = CGPA x 9.5.

Find your CGPA from semester SGPA

Enter the SGPA of each semester. Add the credits too if your university weighs semesters by credits. Leave credits empty to take a plain average.

SGPACredits
Enter at least one SGPA.

Choose the CGPA to % tab or the % to CGPA tab, pick your board or university, and type your number. The result card shows the answer, the working line (for example 9.5 x 8.2 = 77.90%) and a class label. A Copy result button saves the figure, and Reset clears the box. If you only have semester grades, a box under the calculator turns your SGPA values into a CGPA first.

What is CGPA? Full form and meaning

CGPA full form is Cumulative Grade Point Average. The CGPA meaning is simple. It is one number, usually out of 10, that averages the grade points you earned across your whole course. If you are asking what is CGPA in plain words, it is your overall grade in a single figure.

SGPA is the semester version. It stands for Semester Grade Point Average and covers one semester only. Your CGPA is built from your SGPA values. Many universities weight each semester by its credits, and some use a plain average. The idea comes from the grade point average system used in many countries.

A grade point is not a mark. An A grade might carry 9 points and a B grade 8, but the scale differs from board to board. That is why CGPA to percentage rules differ, and why a CGPA cannot be read as a percentage until you apply one.

How to convert CGPA into percentage

This is how to convert CGPA into percentage for CBSE. The commonly used rule is percentage = CGPA x 9.5. Take a CGPA of 8.2. Multiply 8.2 by 9.5 and you get 77.9%. The CGPA to percentage calculator shows the same working line, 9.5 x 8.2 = 77.90%.

You can do it by hand in two steps. First, 8 x 9.5 is 76. Second, 0.2 x 9.5 is 1.9. Add them and the answer is 77.9.

Here is a quick table for the CBSE multiplier.

CGPAPercentage (CGPA x 9.5)
1095%
9.590.25%
985.5%
8.580.75%
876%
7.571.25%
766.5%
6.561.75%
657%
5.552.25%
547.5%

Notice the top row. A perfect 10 CGPA gives 95%, not 100%. The multiplier is an estimate. It is not your exact score. The CBSE site, cbse.gov.in, is the place to check any current notice about your own result.

How to use the CGPA to percentage calculator in 3 steps

You do not need an account. It takes under a minute.

Step 1: Choose the tab and your board

Open the CGPA to % tab, which handles CGPA to percentage. Under Board / university, the menu shows CBSE (CGPA x 9.5). Type your CGPA in the box below it. The field takes a value between 0 and 10, or your own scale. The result card shows the percentage, the working line and a class label such as First Class with Distinction. A small note under the card repeats the rule in use.

CGPA to percentage calculator: CBSE CGPA 8.2 gives 77.90%

Step 2: Switch to % to CGPA if you need it

Click the % to CGPA tab to go the other way. Enter your percentage, a value between 0 and 100. The card gives the CGPA and a line such as “77% converts to a CGPA of 8.11 (CBSE)”. The same board menu applies, so the multiplier stays the same.

Percentage to CGPA tab: 77% converts to a CGPA of 8.11

Step 3: Build a CGPA from your SGPA values

No CGPA on your mark sheet? Open the section called Find your CGPA from semester SGPA. Enter the SGPA of each semester. Add the credits too if your university weights semesters by credits. Leave the credits empty and the tool takes a plain average. Click Add semester for more rows, then click Use this CGPA above to send the result up to the calculator.

How to calculate CGPA from SGPA: three semesters give 7.60

My test: CGPA to percentage in three runs

I ran the CBSE (CGPA x 9.5) setting of this CGPA calculator with three inputs.

A CGPA of 8.2 gave 77.90% with the label First Class with Distinction. A CGPA of 7.6 gave 72.20% with the label First Class. On the % to CGPA tab, 77 gave a CGPA of 8.11.

Then I tried the semester box. I entered SGPA values of 7.1, 8.2 and 7.5 and left the credits empty. The tool reported “CGPA after 3 semesters: 7.60 (simple average)”. That matches 22.8 ÷ 3. Carrying the 7.60 into the calculator gave 72.20%.

How to calculate CGPA from SGPA

Knowing how to calculate CGPA saves you when the mark sheet shows only semester results. There are two common ways.

Plain average. Add your SGPA values and divide by the number of semesters. For 7.1, 8.2 and 7.5 the sum is 22.8 and the answer is 7.60.

Credit-weighted average. Multiply each SGPA by that semester’s credits, add the results, and divide by the total credits. Say the three semesters carry 22, 24 and 20 credits. That gives (7.1 x 22) + (8.2 x 24) + (7.5 x 20) = 503, and 503 ÷ 66 is about 7.62. The gap to the plain average is small here. It grows when credits differ a lot.

Use whichever method your university states. If your results page already prints a CGPA, use that figure and skip this step. If your CBSE Class 10 result gave grade points, the CGPA is usually the average of the grade points in your five main subjects. Points of 9, 8, 9, 9 and 7 add up to 42, and 42 ÷ 5 is 8.4. Times 9.5, that is 79.8%.

CGPA to percentage rules for other boards

Not every institution uses 9.5. A CGPA to percentage result is only as good as the rule behind it. The same CGPA of 8 can give very different percentages.

RuleCGPA 8 becomes
CBSE: CGPA x 9.576%
CGPA x 10, as many guides quote for Anna University80%
Mumbai University, older 10-point rule: 7.1 x CGPA + 1167.8%
VTU, older schemes: (CGPA – 0.75) x 1072.5%

That is a spread of 12 points from one CGPA. These rules come from published guides, and I could not confirm each one from the university’s own notice. Newer schemes may differ. Open the Board / university menu in the tool and pick your own board or university if it is listed. If it is not, check your notification and work out the figure with the CGPA multiplier it gives.

SRM CGPA calculator: which rule to use

Students searching for an SRM CGPA calculator usually want one thing: the percentage for a job or admission form. Many student guides use CGPA x 10 for SRM, so a CGPA of 8.0 becomes 80%. I could not find that rule in an SRM document, so treat it as a common estimate.

If the form wants an official figure, ask your department or the controller of examinations for a conversion certificate. Many universities issue one on request. For quick planning, this CGPA to percentage calculator gives you a fast estimate, and you can switch the board to compare results.

Percentage to CGPA: going the other way

Percentage to CGPA is the same rule in reverse, so run CGPA to percentage first if you want to check your working. Divide your percentage by the multiplier. With CBSE, 77 ÷ 9.5 is 8.105, which the tool rounds to 8.11. An 80% score gives 80 ÷ 9.5, or about 8.42.

This is useful for targets. If an exam board or university asks for a CGPA and you only know the percentage, run the % to CGPA tab. Remember the result is an equivalent, not the grade point printed on a transcript. A foreign university or a scholarship form may want the official figure.

Where forms ask for the CGPA to percentage figure

Engineering and MBA entrance forms ask for a CGPA to percentage figure. So do job applications that list a minimum of 60% or 65%, and scholarship forms with a cutoff. Government job notices often give their own formula, and when they do, follow that one.

Write the figure exactly as the form wants. Some portals take two decimals and some take whole numbers. If a notice says 60% and your result is 59.85%, do not round it up yourself. Ask the recruiter or the college how they treat it.

The class label in the tool is a guide. In my test, 77.90% showed First Class with Distinction and 72.20% showed First Class. Colleges set their own bands, so check how yours are defined.

Common mistakes in a CGPA to percentage conversion

  • Using x 10 for a CBSE result. The CBSE rule is x 9.5, and the gap at CGPA 9 is 4.5 points.
  • Averaging SGPA values when your university weights credits. Use the credits box.
  • Typing a percentage into the CGPA box. The CGPA field accepts 0 to 10.
  • Rounding early. Convert first and round once at the end.
  • Treating the estimate as official. Ask for a certificate when the form needs one.

For a regular mark sheet that shows marks, use our percentage calculator for marks instead.

Quick answers before you start

What is the CGPA to percentage formula?

For CBSE it is percentage = CGPA x 9.5. Other boards and universities use their own rule, such as CGPA x 10, so check your own notification.

What is the CGPA full form?

Cumulative Grade Point Average. It averages your grade points across all semesters or the whole course.

How to calculate CGPA from SGPA?

Add your SGPA values and divide by the number of semesters. If your university uses credits, multiply each SGPA by its credits, add the products and divide by total credits.

How do I convert percentage to CGPA?

Divide the percentage by the multiplier. At 9.5, a score of 77% gives a CGPA of about 8.11. Use the % to CGPA tab to do it in one tap.

Which multiplier should an SRM student use?

Many guides use CGPA x 10 for SRM, but I could not confirm it from an SRM document. Ask your department if the form needs an official figure.

Is this CGPA to percentage calculator free, and is the result official?

It is free and needs no sign-up. The result is an estimate. Use the figure on your official mark sheet or certificate when one exists.

Conclusion

Start with the CGPA on your mark sheet, pick your board and run the CGPA to percentage conversion. Read the working line under the result. If your form follows another rule, check the notification and compare. Then copy the percentage and paste it where the form asks.